Rental Hoisting Equipment: Understanding Its Control Basics

Dec 2, 2022Construction Equipment Safety, Construction Hoists, Equipment

Do you work in the construction industry and frequently operate rental hoisting equipment? If so, it’s important to be aware of the basics of controlling this type of machinery. In this article, we’ll cover some essential tips for operating rental hoisting equipment safely and effectively. Whether you’re new to operating this type of equipment or simply want to brush up on your skills, be sure to read on!

Erecting the Mast of a Construction Hoist


The mast of a construction hoist is a critical component of the overall structure. It is responsible for supporting the boom and providing stability during operation. The process of erecting the mast can be broken down into a few simple steps. The base of the mast must be securely anchored to the ground and the lower sections of the mast are raised into position and bolted together.


Once the lower section is complete, the upper section is raised and attached to the lower section. The boom is attached to the top of the mast and secured in place. With careful planning and execution, erecting the mast of a hoist can be a relatively straightforward process.

Connecting The Wire Ropes To The Drum

Connecting The Wire Ropes To The Drum

In order to connect the wire ropes to the drum of a hoist for construction, first make sure that the hoist is de-energized and locked out per OSHA standards. Next, remove any wire rope clips or fasteners that are currently in place. Take the end of the wire rope and feed it through the block, around the sheave, and back through the block again. 


Make sure that you leave enough slack so that you can easily pull on the rope without putting too much tension on it. You’ll need to re-attach any wire rope clips or fasteners to secure the rope in place. Check all connections before energizing the hoist to avoid any accidents.

Fixing the Platform to the Cage


The construction hoist platform must be securely attached to the cage at all times. There are four main attachment points on the rental hoisting equipment platform, two at the front and two at the back. The front attachment points are located at the corners of the platform, and the back attachment points are located just behind the center of the platform. 


Each attachment point must be securely fastened to the cage with a heavy-duty ratchet strap. In addition, there should be a minimum of four additional ratchet straps evenly distributed around the perimeter of the platform. These extra straps will help to secure the platform in case of any unforeseen movement of the cage. 


By following these simple hoisting equipment instructions, you can be sure that the rental hoisting equipment platform will be safely and securely attached to the cage at all times. With rental hoisting equipment, the providers will be able to help you fix this properly.


Testing the Safety Devices 

Testing the Safety Devices Rental Hoisting Equipment

It is essential that rental hoist equipment is thoroughly tested before being used on-site. This helps to ensure the safety of workers and minimizes the risk of accidents. There are a number of different safety devices that need to be tested, including the brakes, emergency stop button, and anti-collision system. Testing the brakes is particularly important, as they play a vital role in stopping the hoist in an emergency situation. 


To test the brakes, they should be applied at full speed and then released. The hoist should come to a complete stop within a certain distance. If it does not, then there is a problem with the brakes and they need to be repaired before the rental hoisting equipment can be used.


Looking for a Construction Hoist? Contact United Hoists Now! 

Now that you understand the basics of controlling a construction hoist rental hoisting equipment, it’s time to get out there and start using one! If you’re not sure where to start, United Hoist is your dependable source of quality construction hoists for rent. Once you have your construction hoists, be sure to read the user manual carefully and always follow safety precautions when operating it. With a little practice, you’ll be an expert in no time!

United Hoist has been excellent to work with from the initial pricing phase throughout on site operation.  They have met all the dates needed on site to erect the hoist and have continued to service as scheduled/needed.  Our estimating, management and field staff have been pleased with United Hoist on our projects.

Heath M.

Vice President

Quote Request